Millions of solar panels have been imported into the country. Quality assurance is looking to catch up
| M |
uhammad Zaid, 24, an energy systems engineer working in Chakwal and Islamabad, has been watching people from various trades enter the solar installation business over the recent years. Many of them have little experience of electrical systems but have found work installing equipment for which demand has grown rapidly.
The problem, he says, is that many do not know how to calculate wind pressure, assess the strength of a mounting structure or carry out the basic calculations required before installing a system.
Zaid has seen many instances of installation undertaken without proper design. Panels are sometimes mounted without adequate structural support. His concerns are shared by other people in the industry. Muhammad Tayyab, 29, who has five years of experience selling and installing solar equipment on Hall Road in Lahore, says complaints about malfunctioning systems frequently lead back to faulty wiring.
“Some installers do not use breakers, although a breaker does more than any other part to protect a house from fire and short circuit hazards. Earthing and fire alarms are also left to the uninitiated customer’s choice,” he says.
The expansion of the solar energy market has created work for people across the supply chain, from importers and retailers to technicians and construction workers. But the demand for installations has grown faster than the availability of people with the necessary training. The result is a market in which the quality can depend heavily on whom a customer happens to hire.
Following thunderstorms on May 24, 2025, Provincial Disaster Management Authority of the Punjab reported 124 accidents across the province, attributing more than 70 percent to solar panels or their mountings. Civil society organisations subsequently disputed the figures. The incident nevertheless brought attention to the structural safety of rooftop installations and the absence of consistent installation practices.
Zaid says government-certified engineering, procurement and construction (EPC) companies are few and concentrated mainly in Lahore, Islamabad and Karachi. In cities like Multan, Chakwal and Jhelum, many customers have to hire installers who have no formal certification.
The gap is reflected in the certification figures. The Private Power and Infrastructure Board reported that 689 solar PV installers had been certified by February 2025, following the addition of 149 installers during the preceding eight months. More than 143,000 installations, with a combined capacity exceeding 2,113 MW, were recorded during that period. The number of certified installers thus remains small in relation to the pace of installations.
Design is another concern. Zaid says panels should generally face south to achieve good generation throughout the year and avoid shielding.
“Wiring is the most important part,” he says. Installers must calculate the appropriate wire gauge, choose the correct breaker and match the capacity of the electrical components. Many, he warns, do not carry out these calculations.
Problem may begin even before the equipment reaches the roof. The quality of the panels, for one, is difficult for an ordinary buyer to establish. A consumer may compare prices, wattage and brand names, but identifying manufacturing defects requires laboratory testing.
Testing the imports
For years, Pakistan did not have an internationally accredited laboratory to test imported solar panels. An Institute of Policy Studies report published in February 2022, titled Assessment of Net-Metering Based Solar Systems Installed at IESCO and LESCO, examined 40 solar photovoltaic systems in Islamabad, Rawalpindi and Lahore. Conducted with support from GIZ Pakistan and the Alternative Energy Development Board, and with participation from the NEPRA, IESCO, LESCO and other industry stakeholders, it found that approximately 22.5 percent of the systems examined were non-compliant in one or more areas.
Around 22 percent had solar panels that did not meet the quality parameters. The defects included hotspots, snail-trail contamination and delamination. The study also identified inadequate electrical connections in 15 percent of the systems and problems with mounting structures and locations in 10 percent.
The sample cannot be taken as a measure of the countrywide solar market. It did, however, identify problems with panel quality, installation practices and technical inspection at a time when the market was beginning to expand.
The absence of adequate testing capacity made it difficult to address these problems systematically.
Pakistan-Korea PV Modules Testing Laboratory in Islamabad was established to fill this gap. The Pakistan Council of Renewable Energy Technologies, under the Ministry of Science and Technology, developed the facility in collaboration with the Korea International Cooperation Agency. Groundbreaking took place in July 2022. The laboratory was inaugurated on December 6, 2025.
The project received a $9.5 million grant from the Korean government and Rs 185.8 million from Pakistan’s Public Sector Development Programme. KOICA supplied and commissioned the testing equipment and provided nine months of technical training to PCRET personnel.
The facility can conduct 40 different tests on photovoltaic modules. These tests are intended to assess whether panels meet internationally recognised technical and safety requirements.
ISO/IEC 17025:2017 sets out the requirements for the competence, impartiality and consistent operation of testing and calibration laboratories. The Pakistan National Accreditation Council’s active register now lists the Pakistan-Korea PV Modules Testing Laboratory as an accredited testing laboratory. The accreditation is effective from August 31, 2026, until August 30, 2029.
Accreditation of the laboratory and mandatory certification of solar panels are two different matters. The Ministry of Science and Technology has acknowledged this distinction. In a written response to a question in the National Assembly on January 19, the minister said the PSQCA had formulated standards for solar panels and related equipment, but these products were not included in its mandatory certification list.
Once there is legislation, the PSQCA is expected to use the laboratory to conduct random testing of samples from imported consignments. The government had also announced plans to pursue the laboratory’s eventual status as a Certification Body Testing Laboratory under the IECEE scheme, which would enable it to issue IEC compliance certificates and support local manufacturers seeking export markets. This is a separate objective from ISO/IEC 17025 accreditation.
The reporter approached the Ministry of Science and Technology for comment on the laboratory’s significance and current status through its management. The ministry did not respond in time for publication.
The rest is available online.
The writer is a freelance climate journalist from Lahore